Home Appliances: Page 4

If you are finding water after the end of a cycle, you may have a problem that needs to be resolved quickly. There are several ways to check what is going on with your machine.

If you're are experiencing a problem with your front load washer and find that there is very little water or suds, then it should be an easy fix. Not enough water or suds will not clean your clothes properly and cause you to wash the load again.

If you've never owned a fron load washer, things may be different than what you may have experienced in the past. There are several qualities that a front load and top load washer share, but there are also a few differences as well.

You may not have realized it, but picking the right cookware for your cooktop can be a big help. Not only can it result in things being cooked faster, but it will also result in less damage for your tools.

Bubbles may be fun to look at and play with in a bath or at a club, but too much of it in your washer is not a good sign. With high efficiency washers, if you're getting a "Sd" sign on your machine, you have a problem with oversudsing.

If you have a high efficiency washer that is leaking, you have a problem that needs to be corrected quickly. Not taking care of any found leaks, can possibly lead to more damage for you washer and for your home.

If you are pulling your clothes out of your high efficiency washer, and find they are soaking wet, you have a problem. There are a couple of easy ways to help fix this problem, before calling in a professional.

It's annoying to come home each day and see that your fridge's doors are uneven with everything else. Although it may seem like a difficult task to fix, it's actually quite easy.

Nowadays, most of the new model refrigerators are coming equipped with the ability to provide filtered water. This is great for anybody who hates drinking water from a glass with ice in it.

If you're washing your clothes and feel like there is not enough suds in the machine, adding more detergent won't make a difference. It can acutally hurt your clothes and the machine, making it work harder to clean clothes or clean up a mess.

Owning a washer machine, or any other appliance, is a big responsibility. You're able to clean a whole load of clothes with just the push of a simple button or two making things much easier for you. But there are times when things can go wrong.

If you've bee washing your clothes and have noticed a faint odor coming from inside of your washer, you may have a problem. Overloading a washer can produce an odor that is warning you to stop adding clothes to an already tired machine. By continually overloading your washer, you're asking for trouble as well as an excuse to spend money on your machine.

When using a washer, not only are you trying to clean any filth from your clothes, but also take out any existing wrinkles or imperfections as well. But there may be times when the wrinkles stay after being in the wash for a good amount of time.

If you have a hard time when it comes to cleaning the appliances in your home, you need to try and remind yourself. Cleaning them is an important step in making sure they last for a long time. One appliance that is always forgotten about is the dryer.

If you own an old refrigerator, chances are that you have an energy zapper in your home. With some of the more newer models, they zap less energy, but can still waste a good amount.

If you're having a problem with the agitator on your washing machine, this video should be able to help. Many people may not realize it, but the agitator on a washing machine, is supposed to go back and forth and not just one way. This can easily be fixed by removing the agitator and replacing a couple of pieces. Check out the tutorial above to see what you need to do in order to repair the agitator on a washing machine. Enjoy!

Calling someone to come out and repair your washing machine, can cost you quite a bit of money. So avoid having to call someone and do it yourself! With this helpful tutorial, you'll find out how to repair your washing machine's pump, motor, and couplers all in one video. You'll also find out how to remove the body of the machine as well as other parts. So good luck and enjoy!

It's that time of the year again! During the long, cold winter months it can be quite annoying when you have to place article after article of clothing on your body. Buying a space heater is an easy way to add some much needed warmth to your living area. So this tutorial will teach you how to safely use a space heater in your home today. Enjoy!

Ultimate Handyman demonstrates how to check a washing machine pump for blockages. First, disconnect the washing machine from the electricity source and remove the pump. The water sucks through the inlet and is pumped out of the outlet. Check to make sure that the pump doesn't have any open circuits by attaching the leads to the multimeter. Remove the screws to look inside the pump. Remove any debris that may be clogging the propellor. Make sure the O-ring around the edge creates the seal and...

True's Owner Maintenance Video Series shows us how to set the defrost time clock on a True freezer, and also how to cut the shipping band on the compressors of all larger freezers. The time clock is behind the grill at the base of the unit, behind a gray box. There are instructions in the inside of the lid for setting the time clock and for setting the defrost settings, and the video goes through the entire process, as well. Next, the man shows how to remove the shipping band protecting the...