Everything Else

How To: Make a redneck hot tub

This is a tutorial on creating a redneck hot tub using an old bathtub, some wood for a fire , bubble bath and some snow. Get ready to heat up your back woods with this sensational invention.

How To: Diagnose washing machine bearings

Check out this home repair tutorial video that demonstrates how to fix and diagnose your appliance. These videos are for information purposes only. A qualified and proficient engineer should be employed to replace any faulty parts on your domestic appliance.

How To: Replace a Refrigerator Shelf Support Kit

If the shelf support is broken and doesn't give support to hold the shelves, you will have to replace the shelf support kit. You can follow the steps in this video to help you do this easy repair.

How To: Fix a Hotpoint dryer that's not heating up

What is the main point of a dryer? To dry clothes, blankets, and other pieces of fabric of course! When you have a dryer that is not heating up, you have a problem on your hands. But, don't call a repairman just yet.

How To: Fix a tangled load on a top load washing machine

If you own a top load washing machine, you may have a problem with tangles. This can be an annoying thing that happens on a regular basis. But there is a way to help make sure that whatever you put in the washer will stay untangled.

How To: Convert an old fridge into a meat smoker/cooker

Have an old fridge (or, like the creator of this video, easy access to a scrap metal yard)? Convert it into a meat smoker! This DIY guide will teach you how to repurpose a disused refrigerator for smoking meat. For complete, step-by-step instructions on how to make your own cooker from an old metal-body fridge or freezer, watch this free video tutorial.

How To: Remove and repair a Neff oven door

Watch to learn how to remove and repair a Neff oven door. You'll remove and replace parts on an oven door, as well as how to remove the oven door. This oven maintenance video demonstrates removal and replacement of the oven door outer glass, oven door inner glass, door hinges and door handle. Use a professional oven cleaner and ceramic scraper to remove burnt on stains from the oven inner door glass.

How To: Identify the model number and ID tag on fridge freezer

Check out this instructional home repair video to learn how to identify and find your manufacturer's label and model number on your refrigerators and freezers. The model number is usually essential. People make the mistake of assuming that the name and number on the front panel is all you need. Many fridge and freezer manufacturers use the model number as well as the serial number. Most have the ID plate inside of the door by the salad bowl, while some hide it behind the kick plate at the bas...

How To: Replace a Blender Coupler

If your blender does not spin anymore, you will probably have to replace the blender coupler. You can follow the steps in this video to help you do this easy repair.

How To: Replace a Refrigerator Door Hinge Kit

If the hinges are bent causing the door not to open and close properly , you will have to replace the door hinges. You can follow the steps in this video to help you do this easy repair.

How To: Replace a belt on a Kirby vacuum cleaner

Once in awhile, however, you will run into the issue of having to replace the belt on a Kirby or any other type of vacuum cleaner. Even the most experienced repairmen will admit that replacing the belt on the Kirby is one of the most difficult repairs they face. However this how to video will show you how to do make this vacuum belt repair yourself. Go through the step by step process of dismantling the powerhead and swapping out the belts on the roller brush.

How To: Replace a Whirlpool refrigerator filter

Find the indication light, located at the top of the Whirlpool refrigerator just inside the door. This tells you when to change your water filter. A green light indicates the filter is good and a red light indicates you need to change the filter.

How To: Replace an Oven Thermal Fuse

If your oven will not heat, you will probably have to replace your oven thermal fuse. You can follow the steps in this video to help you do this easy repair.

How To: Check a washing machine pump for blockages

Ultimate Handyman demonstrates how to check a washing machine pump for blockages. First, disconnect the washing machine from the electricity source and remove the pump. The water sucks through the inlet and is pumped out of the outlet. Check to make sure that the pump doesn't have any open circuits by attaching the leads to the multimeter. Remove the screws to look inside the pump. Remove any debris that may be clogging the propellor. Make sure the O-ring around the edge creates the seal and ...

How To: Replace the Dryer's Idler Pulley

The dryer’s idler pulley provides tension to the dryer’s drum belt so the belt won’t slip when the drum is turning. It can become faulty over time due to increased friction. If your dryer is making a squeaking or squealing nose then the idler is probably faulty. Replacing this pulley is a simple project. Repair your noisy dryer with this step-by-step tutorial!

How To: Fix a Dyson DC25 vacuum cleaner that won't suck

If you're trying to vacuum around the house, but realize that nothing is being picked up, you have a big problem on your hand. There are numerous reasons for why your vacuum isn't sucking, and it can be confusing for where to start.

How To: Replace a Dryer's Thermal Fuse

The thermal fuse in your dryer is a safety device designed to prevent the dryer from overheating. The fuse is heat sensitive and when the dryer becomes too hot it will blow. If the fuse has blown then the dryer will either stop working or there will be no heat when the drum is turning. A blown thermal fuse is simple to replace. With a few tools, a do it yourself warrior can save valuable money from being wasted on a service call. Here is a detailed set of instructions on how to replace a ther...

How To: Replace a Rear Dryer Drum Felt Seal

If clothes have brown marks on them or heat escaping from rear of dryer drum, you will probably have to replace the rear dryer drum felt seal. You can follow the steps in this video to help you do this easy repair.

How To: Use your broiler drawer on a GE oven

Have you ever tried cooking a meal and came across a recipe that asked to broil something and had no idea what it was? Well then, this video should make things clearer.

How To: Replace a Bosch fan oven element

Check out this home repair tutorial video that demonstrates how to fit and replace your fan oven element in a Neff & Bosch appliance. Follow the step by step instructions in this domestic appliance repair video to remove the fan oven element. Please note that all work should be performed by a qualified person. Make sure to take the necessary precautions to ensure a safe removal of the fan oven element.

How To: Replace the Dryer's High Limit Thermostat

The high limit thermostat can be found in gas and electric dryers and serves as a safety feature that helps to prevent the dryer from becoming too hot when it’s running. The thermostat is designed to shut off power to the dryer’s heater when the dryer vent is blocked or clogged. The high limit thermostat on your dryer is something that does need to be replaced from time to time. Fortunately, it is a job that you can do on your own with basic tools.

How To: Replace a Refrigerator Evaporator Fan Blade

If the fan blade cracked, the hole where shaft goes is worn out, the fan blade not spinning properly, air from freezer section not blowing into refrigerator section, refrigerator section is too warm, you will have to replace the evaporator fan blade. You can follow the steps in this video to help you do this easy repair.

How To: Replace a HEPA filter on a Dyson DC04 upright cleaner

Watch to learn how to replace the HEPA filter on a Dyson DC04 upright cleaner. You'll remove and replace the Pre Motor Filter and the Post Motor HEPA Filter on a Dyson DC04 vacuum cleaner. It is important to change the filter regularly as part of regular vacuum maintenance and to prevent loss of suction.

How To: Replace Your Dryer's Belt

Over time, the dryer belt can become hard and brittle when the drum is turning loud noises such as squeaking, squealing or thumping noises can occur. Replacing the belt is an easy task for the do-it-yourselfer. All that’s required is a few simple tools. Here’s a step-by-step guide to help you install a new belt in your dryer.

How To: Replace a Refrigerator Light Socket Kit

If the light socket is shorted out and light bulb does not come on, you will have to get a light socket kit. You can follow the steps in this video to help you do this easy repair.

How To: Replace a Dryer Door Latch

If your dryer door will not stay closed, you will probably have to replace the dryer door latch. You can follow the steps in this video to help you do this easy repair.

How To: Replace a Dryer Timer Knob

If your dryer shaft is damaged and you can not turn the timer anymore, you will probably have to replace your dryer timer knob. You can follow the steps in this video to help you do this easy repair.

How To: Replace a Whirlpool Washer Agitator Repair Kit, Medium Cam

If the upper half of the agitator is not working, maybe it is loose and wobbles around, you may need to install this kit. This kit contains the agitator dogs and everything that you should need to rebuild the upper agitator. You can follow the steps in this video to help you do the repair.

How To: Replace a Whirlpool Washer Motor Coupling

The motor coupling goes between the motor and the transmission. If it fails the washer will not spin or agitate. If the washer fills with water but then does not agitate, but you hear the motor running, the coupler could be the problem. You may hear some clicking noises as the broken pieces spin around. You may also see a pile of black rubber pieces on the floor under the middle of the machine. You can follow the steps in this video to help you do the repair.

How To: Mend Wall Holes Bigger Than Nails

Do you know how wonderful toothpaste is? Here's the scoop. If you've hung pictures or other thing on the wall that required a molly or anchor bolt, and you have to move them and you have holes exposed in your wall. Well "FEAR NOT", toothpaste to the rescue. You will need household items like - toilet paper, or paper towel, or paper napkin, or Kleenex tissue, a utility knife, hammer putty knife, sponge, primer/sealer, paint of your choice and of course the toothpaste.

How To: Fix a GE Gas Range Burner That May Be Clogged

Sometimes overflowing liquids or food can get into some pretty small places on your stove. When this happens, it can result in your stove being damaged or not working properly.

How To: Fix a GE oven that is not going over 100 degrees

If you're experiencing some problems with your GE oven, don't call a service person just yet. Sometimes the fix is so simple that when the homeowners realize it, it may already be too late and they'll need to fork over a ton of money.

How To: Reverse the door on a Hotpoint dryer

The great thing about some dryers out on the market, is the ability to reverse the doors at any time. This allows for the machines to be placed in a variety of different locations.

How To: Easily replace the belt on a Dyson DC07

If your brushroll isn't picking up any kind of big debris on the ground, you might have a problem with your vacuum cleaner's belt.

How To: Fix a front load washer that won't wash or rinse

If you have a front load washer that won't fill, wash, or rinse then you have a problem on your hands. Now, before you call a professional, you should try these quick, easy to follow tips. It could save you a good chunk of money.

How To: Align the doors to a fridge with adjustable rollers

It's annoying to come home each day and see that your fridge's doors are uneven with everything else. Although it may seem like a difficult task to fix, it's actually quite easy.

How To: Fix your washer if you don't have enough suds

If you're washing your clothes and feel like there is not enough suds in the machine, adding more detergent won't make a difference. It can acutally hurt your clothes and the machine, making it work harder to clean clothes or clean up a mess.

How To: Repair the agitator on a washing machine

If you're having a problem with the agitator on your washing machine, this video should be able to help. Many people may not realize it, but the agitator on a washing machine, is supposed to go back and forth and not just one way. This can easily be fixed by removing the agitator and replacing a couple of pieces. Check out the tutorial above to see what you need to do in order to repair the agitator on a washing machine. Enjoy!

How To: Replace your washing machine lid

Over time, the lids to a washing machine can become damaged and almost hard to use. This can be a problem especially when most lids are needed to start and stop the machine. In this tutorial, you'll be finding out how to replace the lid to a washing machine. It's pretty easy to do, will only take you a good hour to complete, and will result in a better looking and working machine. Enjoy!

How To: Set the defrost timer on a True Freezer

True's Owner Maintenance Video Series shows us how to set the defrost time clock on a True freezer, and also how to cut the shipping band on the compressors of all larger freezers. The time clock is behind the grill at the base of the unit, behind a gray box. There are instructions in the inside of the lid for setting the time clock and for setting the defrost settings, and the video goes through the entire process, as well. Next, the man shows how to remove the shipping band protecting the c...